What Is Conductive Gel, and Why Does Your Device Need It?
If your microcurrent or RF device has ever stung, felt patchy or simply stopped working, the gel is usually why. Here's what conductive gel does, why stand-ins cause problems, and how to use it right.
- What it is: a water-based, ionized gel that lets current, radiofrequency or ultrasound move evenly between a device and your skin.
- Why it matters: without it, treatments can sting, feel patchy or not work at all. Many devices won't register contact on dry skin.
- Only use your device's gel: for La Luer, that's our ionized Hyaluronic Conductive Treatment Gel. Serums are too thin to carry the current, and some ingredients, like vitamin C, are meant to stay closer to the surface. That's when treatments sting or irritate skin. Oils, moisturizers, makeup and sunscreen block the current.
- Start on clean, dry skin: nothing should sit between your skin and the gel.
- Out of gel? Skip that session.
What is conductive gel?
Current travels easily through water, but poorly through the dry outer layer of your skin. That outer layer is the main thing standing between a device and the skin underneath.
Conductive gel fills the tiny gaps between a device's probes and your skin, so energy spreads evenly instead of concentrating at a few contact points. That's what keeps treatments comfortable and effective. It also gives the device a smooth glide.
That even contact is what lets the current pass through properly and reach deeper, into your skin and the muscle underneath.
How conductive gel works.
Even contact, deeper reach Without gelDeviceSkin surfaceDeeper skinMuscleTiny gaps leave only a few contact points. The current bunches up there, which is what stings, and it doesn't reach evenly.
With conductive gelDeviceSkin surfaceDeeper skinMuscleThe gel fills the gaps, so the current spreads evenly across the whole treatment head and can reach deeper into skin and muscle.
Which devices need conductive gel?
| Technology | Needs a gel? | Why |
|---|---|---|
| Microcurrent / EMS | Yes | Current needs a continuous, wet path. On dry skin it can sting or "zing." |
| Radiofrequency | Yes | RF gently heats the skin. Gel keeps full, even contact, so the warmth spreads evenly instead of building up in "hot spots" where the device touches unevenly. That helps protect the skin's surface and keeps treatments comfortable. |
| GalvanicIontophoresis | Yes. Only use your device's gel, since it's part of the treatment | Galvanic current helps move charged ingredients into skin, so what's in your gel is what gets delivered. |
| Ultrasound | Yes. Only use your device's gel | Sound waves don't travel well through air. Gel carries them into the skin. |
| LED masks and lasers | No | Light doesn't need a conductor. Follow your device's instructions. |
Every device is different, so always follow your device's instructions. Curious which technologies other at-home devices use? See At-Home Facial Devices Compared.
Why does the La Luer device need La Luer's gel?
The La Luer Facial Treatment System combines 6 technologies in one device: EMS and microcurrent, radiofrequency, ultrasound, galvanic current, LED light and sonic pulsation. Almost all of them rely on the gel, each in its own way.
| La Luer technology | What the gel does |
|---|---|
| EMS and microcurrent | Carries the current evenly, so it can reach deep into the skin and muscle. |
| Radiofrequency | Spreads the warmth evenly, without hot spots. |
| Ultrasound | Carries the sound waves into the skin. |
| Galvanic current | Its ingredients are what get infused, so the gel is part of the treatment itself. |
So for La Luer's Facial Treatment System specifically, our Hyaluronic Conductive Treatment Gel is a must, not an option. It's ionized and formulated to work synergistically with the device, so every technology performs the way it should. Other gels and skincare products aren't made for it. Some people have tried vitamin C gels or other gels with stronger active ingredients, and with current helping push them in, those can irritate your skin. Here's what goes wrong with everyday skincare.
Even water-based serums are spread too thin to carry the current well, and they sink in within minutes. Without a thick, conductive layer, EMS can't reach deep into the skin and muscle, so you lose the toning and lift. As the serum absorbs, contact also turns patchy and the current concentrates at a few points, which is when you feel stinging or a sharp "zap." Many serums also contain active ingredients that can irritate skin when current is added.
Water carries current. Oil doesn't. It insulates your skin, so the current can't pass through evenly. Depending on the device, it either stops sensing your skin or the current pushes through the few spots where the oil is thinnest.
Most moisturizers contain oils, butters, waxes or silicones that stay on the surface as a film. Even if you put gel on top, that film sits between the device and your skin and blocks conductivity.
They're made to stay put on your skin, and that same film keeps current from reaching it.
With La Luer, the gel isn't just there to conduct. It's ionized, and it's formulated so every ingredient is meant to go into your skin, to enhance your results, not cause skin sensitivity over time. In Infuse, galvanic current and ultrasound help move its ingredients into your skin: hyaluronic acid in 3 molecular weights to hydrate, azulene to soothe, glycosaminoglycans for elasticity and flexibility, and green tea extract for antioxidant support. A gel that only conducts gives your skin nothing to drink in.
You're already putting in the time. Why not get the full benefit?
Always start on clean, dry skin
Nothing should sit between your skin and the gel.
- 1CleanseRemove all makeup, sunscreen, oils and skincare from the area you're treating.
- 2Pat drySkin should be clean and dry, with no serum or moisturizer underneath.
- 3Apply your device's gelA thick, even layer of La Luer's Hyaluronic Conductive Treatment Gel, right on bare skin.
- 4Wash off, then apply your serumsWhen your treatment is done, wash or towel off the remaining gel. Then apply your serum and moisturizer. That's when your skin is ready to drink them in.
La Luer's Infuse treatment uses galvanic current, which helps move charged ingredients from the surface deeper into your skin. Our gel is ionized and made for exactly this, carrying the current evenly while its hyaluronic acid gets moved in. That's also why you shouldn't use it over anything else. The current helps push in whatever is on your skin. See how Infuse works.
Skip that day's treatment and pick back up when your gel arrives. Missing a session won't undo your results, but a stinging treatment can irritate your skin.
How much conductive gel should you use?
More than you think. Apply a thick, even layer, enough that the probes glide and you can barely see your skin through it.
- 1Start thickCover the area you're treating with an even, generous layer.
- 2Work one area at a timeTop up as it absorbs, so the device always glides.
- 3If it stings, add moreThe same goes if the device stops sensing your skin.
With La Luer, apply a thick, mask-like layer of gel and reapply as needed. Because the gel contains hyaluronic acid, your skin absorbs it as you go. You'll also notice that the more you use the device over time, the less gel you need. That's because your skin is in a more hydrated state. For more on microcurrent technique, read Microcurrent vs. Red LED Light Therapy.
Healthier skin in 3 steps.
How to use La Luer 01 PrepApply a thick layerA thick, mask-like layer of Hyaluronic Conductive Treatment Gel on clean, dry skin.02 TreatChoose your treatmentDetox, Tone, Lift or Infuse, depending on what your skin needs that day.03 GlowGlide, then top upGlide the device over your skin, adding more gel as it absorbs.
What's in La Luer's Hyaluronic Conductive Treatment Gel
Made for the La Luer Facial Treatment System. In Infuse, galvanic current, ultrasound and sonic pulsation help it absorb. See how Infuse works.
- Ionized to conduct the current
- Hyaluronic acid in 3 molecular weights
- Azulene to soothe
- Glycosaminoglycans for elasticity and flexibility
- Green tea extract, an antioxidant
- 2 oz $36, or subscribe and save 15%
- 16 oz $198, the same as 8 bottles
It doubles as a soothing gel mask. Smooth on a thick layer after extractions, a day in the sun, or whenever your skin needs extra care. Wipe it off after about 10 minutes, then seal it in with your moisturizer.
Shop the Hyaluronic Conductive Treatment Gel Or see the Facial Treatment SystemMade from scratch.
Watch Nicole make our gelQuestions people ask
Is conductive gel necessary?
Yes for microcurrent, EMS, radiofrequency, galvanic and ultrasound devices. Without it, treatments can sting, feel patchy or not work. Always use the gel made for your device. LED masks and lasers don't need one.
Can I use my serum with my device?
Not during your treatment. Serums are too thin to carry the current, so EMS can't reach deep into the skin and muscle, and as they absorb, the treatment can sting. Apply your serum after your treatment, when your skin is ready to drink it in.
Can I use my device over moisturizer or face oil?
No. Oil doesn't conduct current, and most moisturizers leave an oily film behind, so the current can't reach your skin evenly. Always start on clean, dry skin, then apply your device's gel.
How much conductive gel should I use?
A thick, mask-like layer, enough that the device glides and you can barely see your skin through it. Reapply as your skin absorbs it, and add more if it stings. With regular use, you'll find you need less, because your skin stays more hydrated.
Can I use a different gel with my La Luer device?
No, you must use La Luer's Hyaluronic Conductive Treatment Gel. Some people have tried vitamin C gels or other gels with stronger active ingredients, and with current helping push them in, those can irritate your skin and cause sensitivity over time. Our gel is ionized, and every ingredient is formulated to go into your skin with our device. That's how it enhances your results instead of causing sensitivity.
Do I wash conductive gel off afterwards?
Yes. When your treatment is done, wash or towel off the remaining gel, then apply your serum and moisturizer.
Show all 4 sources
- Birgersson U, Birgersson E, Aberg P, et al. Non-invasive bioimpedance of intact skin: mathematical modeling and experiments. Physiological Measurement. 2011;32(1):1–18. PubMed 21098911
- Kalia YN, Naik A, Garrison J, Guy RH. Iontophoretic drug delivery. Advanced Drug Delivery Reviews. 2004;56(5):619–658. PubMed 15019750
- Polat BE, Hart D, Langer R, Blankschtein D. Ultrasound-mediated transdermal drug delivery: mechanisms, scope, and emerging trends. Journal of Controlled Release. 2011;152(3):330–348. PMC3436072
- Pavicic T, Gauglitz GG, Lersch P, et al. Efficacy of cream-based novel formulations of hyaluronic acid of different molecular weights in anti-wrinkle treatment. Journal of Drugs in Dermatology. 2011;10(9):990–1000. PubMed 22052267
This article is general education and isn't medical advice. If you have a medical condition or concerns about your skin, talk to a dermatologist or your healthcare provider.